concrete paving contractor - folsom, ca
|
Pavers with blended patterns and colors have grown in popularity. They are mostly installed in driveways, patios, and walkways and our concrete paving contractors are here to give you professional advice and services. Reach to one of them on 916-571-0908.
Paving Designs Our concrete pavers are available in a wide spectrum of colors, giving a world of opportunities for special structures that would fit just about any landscape. The choice of color for your pavers is vital. As professionals, we start with the surrounding architectural designs and compare them to the exterior pavers. If you live in a drier region, we advise you to take pavers that tend towards brown and gray hues with subtle tones. Avoid shouting colors such as red hues. However, your preference is what counts the most because we believe that clients are always right. Too bold colors may overwhelm an exterior space. That is why we recommend earth tones to match the surrounding plants, making the overall feeling cool and realistic. Contact us through 916-571-0908 for free quotes and estimates. 
|
Service Areas
|
more about concrete paving contractor - folsom, ca
Precast unit pavers from the leading concrete paving contractor: Upside and Downside
Benefits
Drawbacks
Weeds can sprout in between unit pavers
Constant thawing can cause settling of pavers if they were poorly installed
We highly recommend rectangular or square pavers because they provide varied joint lines for timeless outcomes.
Our Special Installation Services
Often, clients in cold regions request for installation of heating systems beneath the pavers and we are more than willing to give professional installation through our specialists. We also provide high-end pavers which are resistant to de-icing elements. They are great choices for residents who live in freezing climate.
Concrete Paving Installation
The installation of pavers takes 1-3 days depending on the project size. Once installed, they have to be allowed to cures for a few days before subjecting them to any kind of traffic. The installation has 3 main stages namely prep work, pouring, and finishing. When we come to install pavers, this is the procedure that we follow:
Preparation
1. Grading
The space that needs paving has to be graded and prepared for pouring. We clean any debris, level the ground, and compact the soil. Heavy machines can be used if need be e.g. when installing a driveway.
2. Sub-base
A sub-base composed of gravel is necessary for supporting the concrete paver that is about to be laid. The gravel is compacted fully for strength.
3. Form creation
The paving contractor has to build forms on which concrete will be poured. This is the stage where the shape of a paver becomes evident and our client must approve of it before our contractor proceeds.
4. Pouring
Placement
Concrete is poured into the forms created using wheelbarrows and shovels or a truck depending on the size of a project.
5. Finishing
Trowelling
The poured concrete is leveled with a trowel and if any stamping or coloring is needed, the right procedure is followed. A good finish ends with sealing to build a long-lasting paver.
6. Curing
This is the stage where the newly installed paver is allowed to harden. It may take a month and the most crucial hours are the first 2 days.
In Folsom, concrete pavers are the most preferred materials for outdoor spaces and paths. Over the past few years, residents have been focusing on their exteriors and this has created demand for our contractors. That is why we strive to provide the broadest spectrum of paving options to our esteemed clients. There has never been a time when we lack something that a customer demands. We install pavers for patios, driveways, etc. and we know the best units for each job. We always remind our clients the importance of complementing their interiors. Call us at 916-571-0908 if you need pavers installed in your residential or commercial yard.
Benefits
- Pavers are safe because they are non-slip surfaces.
- Their colors and patterns can be arranged to strike spectacular effects.
- Unit pavers provide gaps for water to pass through so that it does not stagnate.
- They can withstand adverse degrees of temperature better than poured concrete.
- They hardly crack if installed professionally.
- They eliminate renovation and replacement in the long run.
- Damaged pavers don’t have to be demolished as new overlays are placed over the existing ones.
- Most unit pavers are warranted against cracking.
- They provide benefits as those of stamped concrete.
Drawbacks
Weeds can sprout in between unit pavers
Constant thawing can cause settling of pavers if they were poorly installed
We highly recommend rectangular or square pavers because they provide varied joint lines for timeless outcomes.
Our Special Installation Services
Often, clients in cold regions request for installation of heating systems beneath the pavers and we are more than willing to give professional installation through our specialists. We also provide high-end pavers which are resistant to de-icing elements. They are great choices for residents who live in freezing climate.
Concrete Paving Installation
The installation of pavers takes 1-3 days depending on the project size. Once installed, they have to be allowed to cures for a few days before subjecting them to any kind of traffic. The installation has 3 main stages namely prep work, pouring, and finishing. When we come to install pavers, this is the procedure that we follow:
Preparation
1. Grading
The space that needs paving has to be graded and prepared for pouring. We clean any debris, level the ground, and compact the soil. Heavy machines can be used if need be e.g. when installing a driveway.
2. Sub-base
A sub-base composed of gravel is necessary for supporting the concrete paver that is about to be laid. The gravel is compacted fully for strength.
3. Form creation
The paving contractor has to build forms on which concrete will be poured. This is the stage where the shape of a paver becomes evident and our client must approve of it before our contractor proceeds.
4. Pouring
Placement
Concrete is poured into the forms created using wheelbarrows and shovels or a truck depending on the size of a project.
5. Finishing
Trowelling
The poured concrete is leveled with a trowel and if any stamping or coloring is needed, the right procedure is followed. A good finish ends with sealing to build a long-lasting paver.
6. Curing
This is the stage where the newly installed paver is allowed to harden. It may take a month and the most crucial hours are the first 2 days.
In Folsom, concrete pavers are the most preferred materials for outdoor spaces and paths. Over the past few years, residents have been focusing on their exteriors and this has created demand for our contractors. That is why we strive to provide the broadest spectrum of paving options to our esteemed clients. There has never been a time when we lack something that a customer demands. We install pavers for patios, driveways, etc. and we know the best units for each job. We always remind our clients the importance of complementing their interiors. Call us at 916-571-0908 if you need pavers installed in your residential or commercial yard.